VIT- Smooth 500mm Pipe

APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C.
MI-VIT Lite pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
MI-VIT Lite pipe should NOT be used to pass through ceilings or combustible walls.

CONSTRUCTION
MI-VIT Lite is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.

INSTALLATION
You should not install a piece of MI-VIT Lite 125mm within 375mm from combustible material, e.g. wood, plaster boards, etc.
When installing make sure MI-VIT Lite is installed the correct way up – the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of the MI-VIT Lite.
MI-VIT Lite is a friction fit joint so does not require sealing of the joints for T600 high temperature installation.
For Pellet installation where positive pressure is present (P1 applications) seals must be places on every joint.
MI-VIT Lite has been designed to be cut, but care must be taken to cover any exposed steel with high temperature paint as this will rust over time.
When installing appropriate PPE should be worn at all times.

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can achieve this by installing MI-VIT Lite with an access doors at changes of direction.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.